Skip to Content

LOCTITE 60 Second - Repair Gel CA



LOCTITE 60 Second - Repair Gel CA, Translucent, 20g

Packaging Size Make your selection 20g

Color Make your selection Translucent

How to use

How to use LOCTITE 60 Seconds Universal Glue?

Shake tube before use. Ensure all surfaces to be bonded are clean, dry and close-fitting. Avoid skin contact with the glue. Gently squeezing the tube near the crimp end, apply a small amount (in thin beads or dots) of LOCTITE 60 sec. Universal Glue to one of the surfaces to be bonded. Bring parts together immediately and hold by hand pressure, without disturbing the bond, for at least 1 minute.

Leave undisturbed for 10 minutes, or preferably overnight, to allow full bond strength to develop. Avoid spillages and protect work surfaces. Remove cured residues of LOCTITE 60 sec. Universal Glue with LOCTITE Glue Remover. For best results, the bonds should be prepared at room temperature (15-25°C) and a minimum of 30% relative humidity. Bonding times may increase in very cold and/or dry ambient conditions.

For optimum product life, use only a minimum quantity of glue, wipe the nozzle with a tissue to remove excess adhesive, replace cap and store the pack in a cool, dry place.

Documents and Downloads

Related Articles

Related Products